Roll forming is a metal forming process in which metal is shaped by a series of rollers. Roll forming produces some of the most widely used metal products in existence.
Roll forming does not involve heat and rollers do not affect the surface properties of the metals. These features make it an ideal choice for shaping polished metals, coated metals, and other metals whose beauty and aesthetic properties need to be maintained.
Roll forming is used to bend metallic sheet metal in order to produce rounded shapes or frames, known as roll formed parts. Roll formed parts are popular because they are precise with tight tolerances, and can be made to conform to a variety of shapes, angles and curves.
Roll forming services are utilized by a wide range of industries, including automotive manufacturing, building construction, architecture, carpentry, fences, appliance and utility, and more.
Examples of roll formed parts and products include: angle irons, aluminum angles and steel angles (used in carpentry and building applications), metal trim and metal channels (used in construction and the manufacture of industrial, commercial and consumer products), metal rings (used to embellish buttons on telephones, in elevators and clothing, to prevent hoses from disconnecting, to keep street signs from falling and to secure lock hardware in doors), metal tube, and metal wall panels (used to improve the appearance of a wall in an office, or to protect a wall in a factory from flying debris or sparks).
More specifically, metal roll forming produces items like: C-channel frames, car frames, fence posts, angled posts, stabilizers, and railings.
Roll Forming – Samson Roll Formed Products a彩平台
Roll Forming – Samson Roll Formed Products a彩平台
Roll Forming – M.P. Metal Products, Inc.
Roll Forming – Johnson Bros. Roll Forming Co.
The earliest found examples of rolling technology were found in the Middle East and South Asia, and date back to around 600 B.C. While they were quite rudimentary, they displayed the same basic principles as models drawn later by Leonardo Da Vinci.
The first rolling machinery, called a slitting mill, was manufactured in Europe in 1590. It worked by passing flat bars of iron in between a set of rolls to form a plate, then a set of grooved rolls to create slits. The slitting mill was later adapted to form roll hoops for barrels.
The modern roll forming process came along in the late 1700s, when a man named Henry Cort patented his use of grooved rolls for forming iron bars. As the years went on, engineers and manufacturers continued to revise the process, making it work with lead, then copper and brass, and now finally with all the metals used today.
In the 20th century, manufacturers began using CNC technology. This technology allows manufacturers to design roll forms on a computer, and then have that computer automate the process. This allows for the repeatable formation of a high volume of precision-made roll formed parts.
Roll formers can create shapes out of most ferrous and non-ferrous metals and alloy material. These include, among others: aluminum, tin, steel, brass, titanium, zinc and zirconium.
Aluminum is one of the world’s most widely used non-ferrous metals. It is valued for its properties of ductility and malleability, thermal and electrical conductivity, and corrosion resistance. It is also non-magnetic, resistant to fire, and a good reflector.
Tin is a naturally occurring element that has been in use in alloys for thousands of years. It is known for its characteristics of: softness, malleability, shine when polished, and resistance to corrosion from water. On its own, tin is susceptible to corrosion from acids and alkalis. Therefore, manufacturers typically alloy it with one or more other metals, such as copper.
Typically, steel is the most frequently used materials for roll forming. Manufacturers can use many grades and forms of steel, including galvanized steel, stainless steel, carbon steel. In general, steel is hypoallergenic, durable, strong, corrosion resistant, and abrasion resistant.
Brass is metallic alloy composed primarily of copper and zinc. There are many different types of brass, all with different levels of properties, like malleability, corrosion resistance, hardness, shine, and antimicrobial abilities.
Titanium is a material known for its extremely high strength-to-weight ratio. This strong metal also has a low density, high ductility and high melting point. In addition, it’s resistant to fatigue, cracking, moderately high temperatures, and corrosion by fresh and saltwater.
Zinc is a naturally occurring element. As a metal, it is blueish-white and lustrous. It is a moderately conductive, fairly brittle, and weak material. However, when combined with other elements, such as steel and copper, to create important alloys like galvanized steel and brass, respectively.
Zirconium is a lustrous, soft, ductile and malleable element. As a metal, it is highly resistant to corrosion and highly reactive with oxygen.
1. Select metal type:
Regardless of the type of material they select, manufacturers create roll formed parts from metal strips, which are often coiled for easy access by roll form machinery.
2. Feed metal to rollers
Roll formers work by forcing metal through a series of horizontal, rotating rollers, or roller dies. These roller die series help them produce a uniform and constant cross-section profile. At the beginning of a roll forming process, manufacturers feed a stock of metal into the first roller die set. Usually, manufacturers feed the metal to the machine at room temperature. This is called a cold roll form process.
3. Let the rollers do their work
The first roller die sets in every roll former are designed in advance to fit tightly around the contours of the metal material. Each subsequent set of rollers is slightly different in terms of position, allowing for the gradual shaping of the metal as it passes through the rollers.
For example, if a customer orders circular metal clamps, a roll forming company takes a long strip of horizontal metal stock. That strip is fed into a roller system that creates circular metal clamps. The first set of rollers will grip the metal strip horizontally in the middle. Slowly, the position of each successive roller in the system will change so that the metal strip, whose horizontal cross section originally looked like a straight line, changes until it looks like a backwards C.
4. Cut to length
Once the metal strip has been formed into the shape manufacturers want, they cut the curved part according to the required length.
Note: In pre-cut roll forming, materials are cut to length before entering the rolling machine; while in a post-cut roll forming, profiles are cut to length after the roll forming process.
If you’re interested in a custom roll form, you have many options available to you. Because roll forming is a modular process, manufacturers can configure a roll form machine to produce all manner of metal shapes. In addition, these shapes may have nearly any bend radius, size, and sheet thickness.
Choosing to customize your order of roll formed parts gives you pre-finished components that will come to you in precut condition. The supplier gives you parts that are ready for assembling. You will just have to begin with the production of your product or application using the custom roll formed parts.
The roll machine market is full of roll formers and roll former tools for every application. The basic roll former machine type consists of an entry section (where you insert the metal), the roller station (where the roller dies shape the metal), a cut off press (where the roll formed part is cut to length), and the exit section (where the part exits the machine onto a table or roller conveyor).
Some roll forming machines also feature laser or TIG welding capabilities. Including one or more of these roll form tooling options on the actual machine will result in a partial loss of energy efficiency. However, it will remove an entire secondary operation from the manufacturing process. They can also incorporate other functions, such as bend rolling and punching.
Manufacturers can further customize their machinery by choosing whether or not it will be an open loop system or a closed loop system. These systems help control the rolling.
Roll forming is an excellent choice for the shaping of coated, finished, cured or otherwise treated metals. Because roll forming processes don't involve heat, and because rollers can be coated with powders or oils that don't react with the metals that they shape, roll forming can shape metals without affecting surface properties. This makes it an ideal shaping method for polished metals, coated metals and other metals whose aesthetic properties must be maintained.
Robust and Efficient
The roll forming process does not take much time to complete, but it creates parts and products.
A given roll former can shape anywhere between 30 and 600 feet of roll formed metal products per minute. Most roll formers are capable of using near 94% of stock metal material during forming operations, which minimizes waste, maximizes efficiency and boosts profitability. Roll forming operations that involve punching or other surface area reduction services produce more waste than those that don't provide such services.
Rapid Turnaround Times
With the roll forming process, you can shape a complex design within a few hours. A roll former, depending on its type and configuration, can cut 30-600 feet of metal sheet per minute. In addition, because the coil used in forming is sourced in the desired cut, product manufacturers only have to complete the design conceptualization and implementation.
For large orders, roll forming creates pieces that are identical every time. You will find more accuracy, uniformity, and consistency in individual pieces as well as the entire production lot.
Low Production Cost
The coils are sourced from some other manufacturer. No time and labor are needed to create metal strips. As a result, the roll forming process with pre-cut metal strips helps the roll forming plant keep their production cost low. Further, identical parts are created using the strips of the same size, meaning there are fewer chances of material wastage.
In addition to this, the roll forming process does not involve heat to roll the metal strips. It helps save on energy or fuel costs. Other methods of metal part production need some kind of heat source to bend the metal strip. However, the roll forming technique does not have such requirements.
Higher Production Volume in Less Time
The use of metal strips allows a manufacturing business to achieve higher production level in comparatively less time. Also, roll forming is a continuous process, which means that as long as a roll former is fed with a continuing supply of metal, it can continue producing shaped products.These methods allow for highly accurate and efficient constant-profile parts to be created in large quantities.
Roll forming is a powerful yet flexible method. All metal, both ferrous and non-ferrous, can be rolled and formed with the roll forming method. Many complex designs that are impossible to form via cross section cutting or stamping method can be easily created through roll forming method. Creating C channels, J channels, U channels, metal rings, and many other metal trims is possible with this method. In addition, you can work on and roll form a pre-finished part that already has layers of painting, coating, and plating.
Fewer Secondary Operations
With roll forming, you can add extra touches that are normally reserved as a secondary operation, right then and there. For example, during the initial production, you can cut, notch, perforate, punch, and otherwise change the metal. This also increases the structural integrity of the piece and better parts joining.
Things to Consider
The only major drawback to roll forming as a metal shaping method is the labor intensity of roller configuration; this process requires a trained professional to precisely set roller systems to ensure a flawless finished product. Recent advances in computer control systems have made this process easier, but it can still be costly. Also, it cannot create sealed ring products; a roll formed metal ring must always be welded or connected with fasteners in order to become sealed.
If you want to leverage the expertise and experience of a top-notch metal form company, then considering the following tips will enable you to make the right choice:
1. Find a certified manufacturer from an online directory
You will find a plethora of metal forming companies and manufacturers out there. However, all may not be able to cater to your needs and specifications. Hence, you should rely on an ISO 9001:2008 certified manufacturer who can provide you matchless customer service at a competitive price.
2. Evaluate the competence or capability of the company
You can go through the company's online site and assess the competence or capability of the enterprise. Clients' testimonials, as well as reviews of the company, will give you a fair idea about the company's specialization as well as the quality of products and services they provide. It is very important that the manufacturer you choose has a history of excellent customer service.
3. Discuss your industrial requirements and get the best quote
Whether you require rapid delivery of metal trims, hot-rolled or cold-rolled metal channels, metal rings or stainless-steel angles, you can discuss your needs with the experts of the company and get the best quote for them. Collect quotes from several manufacturers, compare them, and finally settle on the company that best suit your requirements.
4. Check to see if the manufacturer offers customization
Customizability is a key criterion for many industries. When your requirements are unique, a one-size-fits-all approach cannot serve your purpose. Your manufacturing partner should be able to provide you custom metal rolls or be able to create new prototypes per your fabrication specifications. Consider their turnaround time and delivery options to streamline your production process.
Roll Formed Part Types
- Aluminum angles are bent or conjoined pieces of aluminum that form an angle.
- Aluminum channels are open or closed rectangular tubes made of aluminum.
- Angle irons are bent or conjoined pieces of heavy-duty metal that are often used to support a structure.
- are created
by roll forming various metals, commonly stainless
steel, and provide support in two directions. Angles often contain
holes or slots for connecting parts, which increases strength and
a support system for numerous roll formed products, such as frames
- Custom roll forming is a roll forming service that offers the fabrication of custom products.
- are roll-formed products that provide a support system frames and rails.
- are circular, roll-formed parts used to join and seal.
- fits around the edge of a product or part.
- Metal wall panels are sheets of roll formed metal that are used to cover walls.
are roll forming machines which have housings that support both ends
of the roll tooling shafts.
is a process that uses continuous rolls of metal and does not cut the
piece to size until after it has been roll-formed. This process is the
most common, efficient, consistent and least troublesome roll forming
is a process that uses material that has been cut-to-length before entering
the roll forming machine. This method is primarily used for low-volume
- Roll formed products are metals that have been passed through a series of rollers in order to take on a shape.
- Roll formers are machines that are used to roll form metals.
- are roll-formed products made by bending a piece of steel sheet metal.
- are roll-formed products made of steel that provide a support system frames and rails.
often roll formed from other shapes and commonly function as container
seals and lids. Stainless steal is the preferred alloy.
Roll Formed Part Terms
Piece of equipment that holds metal coil so the roll forming process may
continue uninterrupted while new material is attached to the coil.
processes performed in conjunction with roll forming.
– A deviation from a
straight line in a roll formed piece.
– Procedure in which heated flat sheet metal is transformed
into spiral coils.
– The process of deforming
metal at room temperature in order to increase strength and hardness.
– The system responsible
for providing the roll forming machines with power and moving the metal
coils through the machines.
– The ability of metal
to bend or form without fracture.
– The maximum
amount of stress a metal can accept without succumbing to permanent deformation.
– Deformation at the
end of a roll formed part.
– Piece of equipment
that connects two coils to permit the continuance of metal coils into
the roll forming machine.
– A metal in which
iron makes up a significant component.
Hat Channels - Similar to a C channel, except it has edges that form the “brim” of the hat.
– Mechanism that maintains
flatness of metal being fed into the roll forming machine.
– A metal that
does not contain iron.
changes in the shape of a metal that occur after pushing a metal piece
past its elastic limit. Deformation is accomplished through the application
– The process of cleaning
steel coils in preparation for metal forming processes, such as roll
forming. The coils are subjected to hydrochloric acid that removes impurities,
such as rust, from the metal.
– Imperfections in
the metal coil.
process of changing the rolls on roll forming equipment. This is a long,
– In reference to
the edge of sheet or strip metal that results from cutting to width by
– Deformation in
a roll formed part that occurs when the roll forming process fails to
stretch a part past its elastic limit.
– Deviation from a straight
line in the horizontal plane measured after the part has been formed.
Sweep is caused because of incorrect horizontal roll alignment and/or
uneven forming pressure.
– The acceptable
variation from product specifications, such as cross-sectional dimensions.
– Removing metal scrap
from a metal formed part in order to maintain consistency among metal
– Deformation in a roll
formed part that resembles a corkscrew. Twists are caused by extreme pressure
levels created during the roll forming process.
– The maximum
stress which can be applied to a material without lasting deformation
of that material.
Roll Former Informational Video